Category: Model Railway

Posted on in Bench and track work, model rail details, Model Rail overcoming Derailments, Model Railway

Overcoming Model Railway Derailments

Derailments are sent to try us and boy oh boy, do they put your brain into a spin, trying to work out exactly what is causing the derailment. You can have 3 locos with 2 of them going over the track easily but the third loco derails. Go figure!

This derailment is on a new section of track that has been inserted with a new turnout . This new turnout is also in an awkward location which makes it hard to visualize the problem. The front section goes over the track but carriage derails.

I have been struggling to work out why the train derails, so I made these tools to assist me to narrow down what the trouble is. Turns out, there are a few different issues that need to be fixed.

Derailment tools I have found handy.

I have found these self made tools very helpful at checking the rail gaps. These are easily

made and assist you to check the track in a number of different way.

These tools are really home made gauges from styrene sheet. Inside,outside and rail gauges

Posted on in Bench and track work, Model Railway, Model Railway Structures, Track Planning

Swing up bench

Extending a model railway especially when you are trying to keep the overall footprint to a mimium requires careful planning and thought. This swing up flap enables me to roll out the model railway, swing up the flap and enjoy extra functionality in the operation of the railway. The closed down flap footprint only adds approximately 12mm to the width of the layout.

Swing up flap in the closed position. The blue foam is to protect the wall from becoming marked and to provide a safety barrier for the locos and trains.
Swing up flap in up position
Swing up flap under frame – aluminum hollow tube.
Posted on in Model Railway, Model Railway Scenery

Creating a small lake

Using a piece of clear acrylic sheet to create a nice looking small lake. Firstly I scribed and shaped a piece of thin cardboard to fit the area of the lake. Which I used to glue to the acrylic sheet and cut out on my band saw. With a bit of careful sanding and filing I achieved a very good fit and result. All that was required was to paint the underside of the acrylic sheet. I used 3 different colours, one black one tan and the other light blue. These were sprayed in different spaces on the clear areas of the acrylic. After drying the protective layer was removed to show the result. Now all that is needed is to glue down and fill in to the level of the water. I do intend to have some water trickling down into the lake from out to the right once I work out he best way to achieve this.

Posted on in Model Railway, Model Railway Scenery, Model Railway Structures

Scratch building using match sticks and balsa sheet

It’s interesting to see what you can scratch build using basic materials and a scale rule. The timber stacking shelves and swings was made using match sticks and balsa sheet. I also used fine paper clips for the metal parts of the swings. I am very happy with the timber stacks but feel I could improve the swings.

Scratch build swings and timber storage shelves.
Timber lumber supplies starting to take shape.
Fun at the park (foam is holding a place for milk bar and butchers)
Oh the Jacaranda trees